Price list for Export

Features

• FC is a material with rather low moisture resistance. The function of the binder in this case is performed by urea glue, not emitting harmful substances, which makes it possible to use this type of plywood for finishing works inside residential premises. At the same time, a moderate level is allowed humidity.
  
  

FC - veneer layers are glued with urea glue. The material has several less moisture resistance than FSF. As a rule, during production it is easier to ensure environmental Safety. It is used for the production of furniture, packaging, for interior finishes, structures used in dry rooms.



  1 Sort. Plywood with this grade marking has the ideal surface on which to apply varnish. In this case, the defects of the upper veneer in length should not exceed 20 mm, and such flaws such as chipped edges, lack of veneer on one side of the sheet, should not be quantitatively more than 3. And, if available, the dimensions should be minimal.

2 Sort. Such FC plywood has several defects and possible production damage. Cracks not exceeding 20 cm and inserts are allowed from other wood. Defects in the outer veneer layer, such as scratches and dents, are area should be no more than 5% of the total area of ​​the plywood sheet. At the same time the wood from which the veneer for plywood grade 2 is made may have knots of various colors and holes associated with their loss as a result of processing in production.


  3 Sort. On such plywood, flaws in the amount of 9 pieces of such a nature as knots (accrete, healthy), wormholes up to 6 mm in diameter. The production adhesive can leak onto the edge or joints of veneer sheets by 5% of the total sheet area. The width of the edge defect associated with a shortage of veneer should not exceed 20 cm, as well as overlap.


  4 Sort. All defects present on the veneer sheet are allowed. unlimited quantities, only good adhesion is guaranteed. Is used for manufacture of durable containers and packaging.

Plywood size 1525x1525 mm; The thickness of the sheets varies from 2.4 to 24 mm.

1. Plywood cannot crack through. This is due to the peculiarities of production, due to the fact that the veneer sheets are reliably glued over the entire surface. And even with damage and defects of one of the layers, a through crack cannot work.
2. Good flexibility. Plywood sheets can be bent to almost any shape. Wherein it is enough to make cuts along the sheet without damaging one of the outer layers, and bend sheet. However, a large number of such cuts across the entire surface of the sheet are few reduces its strength, but there is no doubt about the reliability of the resulting structure have to.
3. Excellent transportability. FC plywood is easy enough to transport on long distances without fear of damage to it.
4. A wide range of sizes of plywood sheets. Since plywood has significant overall dimensions, the main of which are 1220x2440 mm, 1250x2500 mm, 1525x1525 mm, construction work is greatly accelerated, for example, for lathing of internal walls or covering the floor for further installation of the laminate. Such the size of plywood allows you to carry out pieces of furniture of rather impressive sizes without building up.
5. Smooth surface on both sides of the plywood sheet with the same strength.  Such dignity allows the use of FC plywood not only for construction and repair works, but also in the manufacture of furniture.
   
6. Plywood FC 1525 * 1525 is easily transported.
   
   
   

Documents

Prices are subject to change, feel free to contact us and check up-to-date prices.

Download Plywood Export Price 01.02.21.pdf

229.72 KB

Download GOST 3916.1-2018 rus.pdf

1.77 MB

Areas of use

Examples

Features

The material is characterized by relatively high indicators of wear resistance, and is preferred due to its high mechanical strength and excellent water resistance, the latter feature is distinctive. FSF plywood acts as one of the most common types of plywood, which is widely used today in the process of carrying out various types of construction work, during production processes, as well as in the implementation of roofing works.

FSF plywood is plywood + resin glue + plywood. The material consists of several layers of veneer, firmly connected to each other phenol-formaldehyde glue with a resinous base.



  1 Sort. Plywood with this grade marking has the ideal surface on which to apply varnish. In this case, the defects of the upper veneer in length should not exceed 20 mm, and such flaws such as chipped edges, lack of veneer on one side of the sheet, should not be quantitatively more than 3. And, if available, the dimensions should be minimal.

2 Sort. Such FSF plywood has several defects and possible production damage. Cracks not exceeding 20 cm and inserts are allowed from other wood. Defects in the outer veneer layer, such as scratches and dents, are area should be no more than 5% of the total area of ​​the plywood sheet. At the same time the wood from which the veneer for plywood grade 2 is made may have knots of various colors and holes associated with their loss as a result of processing in production.


  3 Sort. On such plywood, flaws in the amount of 9 pieces of such a nature as knots (accrete, healthy), wormholes up to 6 mm in diameter. The production adhesive can leak onto the edge or joints of veneer sheets by 5% of the total sheet area. The width of the edge defect associated with a shortage of veneer should not exceed 20 cm, as well as overlap.


4 сорт. All defects present on the veneer sheet are allowed. unlimited quantities, only good adhesion is guaranteed. Is used for manufacture of durable containers and packaging.

Plywood size 1525 * 1525. Plywood thickness ranges from 2.4mm-24mm.

The abbreviation of the FSF brand stands for “plywood and resin phenol-formaldehyde glue '. Differs in an increased level of moisture resistance: it can use when facing indoor and outdoor premises. Although due to the release of phenol some experts do not recommend it for interior decoration. Material is produced from peeled veneer of coniferous or birch raw materials. The finished sheets are obtained by gluing 3 and more layers.

Documents

Download Export Price Plywood 01.02.21.pdf

229.72 KB

Download GOST 3916.1-2018.pdf

1.77 MB

Areas of use

The material is characterized by relatively high indicators of wear resistance, and is preferred due to its high mechanical strength and excellent water resistance, the latter feature is distinctive. FSF plywood acts as one of the most common types of plywood, which is widely used today in the process of carrying out various types of construction work, during production processes, as well as in the implementation of roofing works.



Scope of plywood FSF is extremely wide. This material found itself with manufacturing of insulating products in the field of electrical engineering, in the aviation industry, in the manufacture of pieces of furniture, in the construction process and much more.

Features

The laminating film is applied on both sides of the plywood sheet. In this case, the ends are applied acrylic paint. It increases the moisture resistance of the plywood sheet.

After such processing, film faced plywood acquires the following properties:

• high strength, reducing the likelihood of material delamination;
• resistance to strong temperature changes;
• immunity to bacteria, decay;
• resistance to the influence of chemical reagents.

The building material also has some disadvantages. First of all, this is a decrease in environmental friendliness by impregnating the film with glue. In addition, film faced plywood is more expensive than other types of materials.

Documents

Download Jointed -Export 09.06.2020.pdf

1.18 MB

Download Studded -Export 09.06.2020.pdf

1.18 MB

Download veneer insertion protocol No. 20-021.pdf

5.15 MB

Download plywood trimming - prongs protocol 20-043.pdf

5.06 MB

Download Passport No. 20-122 plywood FOB 21 (Fitted) mm.pdf

6.01 MB

Areas of use

Features

Lamels (latoflexes) - bent-glued products in the form of wooden curved strips used in bed bases as flexible orthopedic elements made of rotary cut birch veneer. Furniture with a latoflex base is characterized by strength, flexibility and sensitivity to human movements.

Sort lamellae I, II, IV

Furniture part produced:
made of bent-glued blanks and has a curved profile along a radius of 3500mm,
from flat-glued blanks,
The shape of the side edge is rounded.

		Part sizes	-
Bent length, mm	L	600*-975	± 1.5 mm / rm
Straight length, mm	L	1190*-1590	±1.5 mm / rm
Width,mm	B	35.38.53.64.66.68.83.170.210	±0.5 mm
Thickness, mm	S	8,9,10	±0.3 mm for bent-glued workpieces  ±0,5 mm for bent-glued workpieces

For the manufacture of latoflexes, the following are used: Rotary cut birch veneer according to GOST 99-96 Urea-formaldehyde resin grade KF-EC TU 2223-035-00203789-2001 Formaldehyde content from workpieces into air corresponds to emission class E 0.5

Documents

Download Export Latoflexes Price 1.12.2020.pdf

1.3 MB

Download GOST 21178-2006 (Latoflexes) .pdf

997.46 KB

Download TU Furniture parts.pdf

550.65 KB

Areas of use

The deflection of the bed with latoflex base enhances the orthopedic effect of the mattress, elements bend only where the body lines require it, thereby allowing to take physiologically correct position of the spine.